Self Sealing Tubes

Self healing tubes have become the latest weapon in the battle against inner tube punctures and flat tires. The self healing tube borrows a principle that has been used in the automotive market for several years. It involves the use of a liquid sealant with rubber adhesive that has a fiber material suspended in it . When the liquid sealant is in the tube and the tube is correctly inflated, the wheel rolls over an object that punctures the tube and the sealant washes over the interior hole where, under pressure, the fiber material begins to make a matrix, clogging the hole and covers the inside of it. As the hole fills, the sealant's rubber adhesive, now exposed to external air begins to set, hardening the "patch" that is being built inside the tube. The wheel's revolutions continue add more sealant, building the patch until air leakage stops. In practice, self healing tubes have a difficult time sealing a hole larger than 1/8" (6.4mm) in diameter, or multiple punctures occurring at the same time, largely because the internal air pressure drops too quickly for the sealant under rotation to be forced into the holes quickly enough before total loss of pressure. Self healing tubes aren't directly designed to seal a sidewall puncture because the rotational velocity of the wheel forces the sealant into the rear of the tread area. Slow leak sidewall punctures can be sealed if the wheel is removed from the bike and "rocked" horizontally, forcing the sealant to wash over the sidewall puncture and seal it. Because the sealant runs to the bottom of a wheel at rest even self healing tubes will lose their air pressure over periods of disuse, because again rubber is porous to air, and all the internal surface area of the tube not covered by the liquid sealant will slowly permit air molecules to pass through it. The solution isn't replacing the tube, merely inflate it and the wheel with sealant is ready for use again. Self healing tubes, depending on their diameter, don't correct just one puncture, there is enough interior sealant in self healing tubes to fill and patch several to many holes as they develop.

In all, rather little is known about Access Marketing, which is based in Shell Beach, California. There is no known street address listed in trade directories and they use a postal box for mailed communication. Steve is said to handle matters related to both sales and service. What we find most interesting, is that with just three well known brands of self-healing tubes in the US market, Access Marketing distributes 2 of them, leaving the Specialized Airlockª as the third. The Self Sealing Tube was the first of their two tube products. Access Marketing then introduced "Slime", a liquid sealant ,that can be installed in a standard replacement tube after or before the tube has been installed. Slime, as an aftermarket product, was successful enough that the Slime Tube brand of self healing tube was introduced. Both the Self Sealing Tube and Slime Tubes use similar butyl tubes made in the orient. The tubes have an amount of sealant installed. The sealant put in the Self Sealing Tube brand has a Black color, while the sealant put in the Slime Tube brand of tubes has the characteristic Green Slime color. It's not known if there is any formula difference in the sealant, other than the pigment used to make it Black or Green.

This is the first of Access Marketing's "self healing" tubes. The Self Sealing Tube, using butyl rubber tubes from Asian factories, has a Black colored sealant inside which seeps out to fill and patch holes as the wheel revolves under pressure. We sell the Self Sealing Tube in the six sizes listed below with their weights including valve cap.

24 x 1.5 - 1.9" - Schraeder $ Price in Catalog
27 x 1 1/8 - 1 1/4" - Schra 270 g. $ Price in Catalog
27 x 1 1/8 - 1 1/4" - Presta $ Price in Catalog
26 x 1.50 - 1.75" - Schraeder 310 g. $ Price in Catalog
26 x 1.50 - 1.75" - Presta $ Price in Catalog
26 x 1.90 - 2.125" - Schra 346.5 g. $ Price in Catalog
26 x 1.90 - 2.125" - Presta 332.5 g. $ Price in Catalog

The Slime Tube was Access Marketing's second self healing tube introduction. Using seamless butyl rubber tubes from Asian factories, the Slime Tube uses Green colored "Slime" sealant inside the tube which seeps out to fill and patch holes as the wheel revolves under pressure. We sell the Slime Tubes in the six sizes listed below with their weights including valve cap.

27 x 1 1/8 - 1 1/4" - Schraeder 257 g. $ Price in Catalog
26 x 1 1/4 - 1 3/8" - Schraeder 269 g. $ Price in Catalog
26 x 1.50 - 1.75" - Schraeder 356.5 g. $ Price in Catalog
26 x 1.50 - 1.75" - Presta 325.5 g. $ Price in Catalog
26 x 1.90 - 2.125" - Schraeder 324 g. $ Price in Catalog
26 x 1.90 - 2.125" - Presta $ Price in Catalog
700 x 19 - 25c - Presta 206 g. $ Price in Catalog

The Airlockª tube is the Specialized brand of self-healing tube. There are six models of the Airlockª, which comes in 3 diameter/widths in either a Presta or Schraeder valve. Airlockª tubes are standard Specialized tubes that have a liquid sealant in the tube. When a puncture occurs, the sealant migrates to the area of the hole ,then hardens over the hole and covers the puncture to prevent further escape of the tires 'air. The Airlockª tubes are made of butyl rubber for Specialized in Taiwan. We know the actual factory of manufacture to be Cheng Shin because of the initials C.S.T. used by Cheng Shin molded into the tube near the valve on each of the models. Specialized is said to use a different formulation of the sealant in each of the widths. We found them all to have a "low-fat milk" colored liquid with a consistency of thinned rubber cement. One of the three sizes is 26 x 1.5/2.2" meaning that it will fit any 26" tire whose width is between 1.5 " and 2.2". Another size is 27 x 1 1/4-1 3/8" or 700 x 28-38c, meaning it will fit a 27" diameter wheel with a tire width that falls between 1 1/4" and 1 3/8" or a 700c wheel with a tire width between 28c and 38c. The last size, 27 x 1-1/18 or 700 x 20-25c, will fit a 27" tire with a width between 1" and 1 1/8" or a 700c tire with a width between 20c and 25c. In an unconventional move, the three presta valve models do not have the exterior of the valve threaded for the nut that usually tightens the valve and rim together, and the nut is not included. The Airlockª, in the case of large or"pinch" generated holes, may not seal, though these larger holes can be patched with a standard patch kit. The weights for each of the Airlocksª, including valve cap, are listed below.

Airlock 26 x 1.5/2.2" - Schra - 282.5 g. $ Price in Catalog
Airlock 26 x 1.5/2.2" - Presta - 279 g. $ Price in Catalog
Airlock 27 x 1 1/4 - 1 3/8" 700 x 28-38c - Schraeder - 195 g. $ Price in Catalog
Airlock 27 x 1 1/4 - 1 3/8" 700 x 28-38c - Presta - 199 g. $ Price in Catalog
Airlock 27 x 1 - 1 1/8" 700 x 20-25c - Schraeder - 138.5 g. $ Price in Catalog
Airlock 27 x 1 - 1 1/8" 700 x 20-25c - Presta - 142 g. $ Price in Catalog